Featured

Air compressors used in industry are, for the most part, well-proven, reliable pieces of equipment, able to operate for years with relatively little maintenance. But their very reliability can lead to problems when the quality of their intake air is neglected.

Many industrial air compressors work in very dusty conditions, particularly in the mining industry, where dust from newly broken rock is particularly abrasive. Dust in the cylinders of a compressor combines with the oil to form a highly corrosive grinding paste. This accelerates wear dramatically and can cause other problems.

RTS Africa Engineering SpinFiltersBack ChannelCooling

All compressors have their own air intake filters which have been designed to filter out tiny low-mass particles. However, if a compressor is exposed to excessive dust from manufacturing or mining where the particles are larger than three microns (μm), the compressor’s air filters block up rapidly. Should the air filter become blocked, it must be replaced.

“With a blocked air filter, the compressor is increasingly starved of air and its efficiency levels drop. Ultimately, this leads to compressor failure. With large industrial compressors costing anything upwards of half a million rand, an unscheduled - and urgent - capital requirement for a replacement and the cost of lost production time can have serious consequences for a company,” says Ian Fraser, Managing Director of RTS Africa Engineering.

“A spin filter will run for years with absolutely no maintenance as electric motors – the only moving part in the spin filter – require infrequent attention. Our spin filters will remove 98% of 15 μm particles and above, 93% of 10 μm particles, and 80% of 5 μm particles. The spin filter is not designed to remove particles of 3 microns or less. However, by using an RTS Africa inertial spin filter to remove most of coarser particles from the air entering a compressor room, the compressor’s own filters will need to be replaced far less often.”

A spin filter consists of a cyclone-shaped tube through which air is propelled or drawn. On entering the tube, the air is induced to spin using vanes. Particles in the tube move to the outside of the vortex, and the clean air in the vortex centre exits through a central orifice at the end of the tube. A secondary stream of air is used to evacuate the dust-laden air back to where it came from.

According to Fraser, spin filters can also be very useful in the direct ventilation of variable speed drives (VSDs). These are used on many compressors and need to be consistently and continuously cooled.

“We have developed a technique for ‘back-channel cooling’ of VSDs. In the past, to cool compressor VSDs, the entire compressor room would be air-conditioned at considerable installation and running cost. As VSDs will run efficiently at temperatures of 40˚C to 50˚C, expensive air conditioning is not needed as all one has to do is to channel clean air at ambient temperatures through the VSDs. The air from a spin filter can be used to fill the entire compressor room with clean, dust-free air,” says Fraser.

“If air needs to be channelled to specific VSDs, air from spin filters is directed along a plenum at the back of the compressors, from where it is drawn by fans into the various VSDs. The air is supplied at about 100 Pascals pressure, which is sufficient to maintain a slightly positive pressure. The air then passes through the VSDs and is vented out to the exterior of the VSD room.”

Magazines

African Fusion

AfricanFusionAfrican Fusion, the official publication of the Southern African Institute of Welding (SAIW), aims to provide up-to-date insight into welding technology and the welding industry.

Capital Equipment News

Capital Equipment News is dedicated to the application of equipment and modes of transport that are used in the mining, construction, quarrying, and transport industries.

Construction World

ConstructionWorldConstruction World was first published in 1982 and has grown to become a leader in its field, offering a unique mix of editorial coverage to satisfy the diverse needs of its readers.

Electricity + Control

ElectricityandControlE + C publishes innovative, technical articles that provide solutions to engineering challenges in measurement, automation, control, and energy management.

Lighting in Design

LightingandDesignLighting in Design is a glossy, upmarket publication aimed at lighting professionals. It is the only B2B magazine in SA that is dedicated solely to the subject of lighting.

MechChem Africa

MechChemJanuary2017cover MechChem Africa supports African engineering and technical managers across the full spectrum of chemical and mechanical disciplines.

Modern Mining

ModernMiningEstablished in 2005, Modern Mining is one of SA's leading monthly mining magazines, noted for the quality and accuracy of its writing and the breadth of its coverage.

Modern Quarrying

ModernQuarryingModern Quarrying is firmly entrenched as a leading industry-specific magazine. It focuses on promoting the science and practice of quarrying and processing in southern Africa.

Sparks Electrical News

SparksElectricalNewsReadable and informative, Sparks Electrical News is the newspaper for those involved in installing and maintaining electrical supplies and equipment.

 
Full Name*
Invalid Input

Company Name*
Invalid Input

Your Email*
Invalid Input

Phone*
Invalid Input

Postal Address 1*
Invalid Input

Postal Address 2*
Invalid Input

Postal Code*
Invalid Input

Street Address 1
Invalid Input

Street Address 2
Invalid Input

Postal Code
Invalid Input

Town / City*
Invalid Input

Country*
Invalid Input

Magazine

Invalid Input

Invalid Input